Authorized Distributor

Free Shipping For Orders Over $50

{"id":6294067806389,"title":"Austin Air Bedroom Machine","handle":"austin-air-bedroom-machine","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Austin Air Bedroom Machine® is designed to give you the ultimate protection against allergens, viruses, bacteria, chemicals and VOC’s. The results of two separate clinical trials show this unit to be highly effective at removing dangerous airborne pollutants from the home. Keep the air in your bedroom free from pollution and get the good night’s sleep you deserve.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Austin Air Bedroom Machine® was used in clinical trials at the University of John Hopkins to reduce Nitrogen Dioxide levels in the homes of local residents. Nitrogen Dioxide (NO2) is a gas often present in homes where there are gas stoves. High levels of NO2 are particularly dangerous for people with COPD. The gas can dramatically increase symptoms of coughing, wheezing and chest tightness.\u003cbr\u003eThe results were dramatic. NO2 dropped in the kitchen by 27% and continued to stay low for the length of the study. Within a week NO2 levels in the bedroom dropped by 23%.\u003c\/p\u003e\n\u003cp\u003eIn a second study at Johns Hopkins, the Bedroom Machine ® was placed in the homes of women, living with a smoker, who were either pregnant or with very young babies. Again the results were impressive. It was clinically proven that running an Austin Air Bedroom Machine® will effectively remove indoor pollutants from the home, including nicotine.\u003c\/p\u003e\n\u003cp\u003eThe Bedroom Machine® addresses the broadest spectrum of air cleaning by removing sub-micron particles including allergens and asthma irritants, noxious gases, odors and chemicals. Austin Air’s 360-degree intake system draws air into all sides of the Bedroom Machine®, passing it through a comprehensive 5 stages of filtration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe result?\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMore clean air delivered faster and more efficiently than any other air purifier on the market.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho should consider The Bedroom Machine\u003c\/strong\u003e®\u003cstrong\u003e by Austin Air?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThose looking for protection against contaminants such as viruses and bacteria.\u003c\/li\u003e\n\u003cli\u003eThose who have difficulty sleeping or have poor quality sleep\u003c\/li\u003e\n\u003cli\u003eIndividuals that suffer from COPD, allergy and asthma attacks at night\u003c\/li\u003e\n\u003cli\u003eAnyone looking to improve their overall health and wellbeing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHealth Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduce the viral load to minimize risk of infection or severity of disease\u003c\/li\u003e\n\u003cli\u003eStrengthened immune system\u003c\/li\u003e\n\u003cli\u003ePeaceful, uninterrupted, high quality sleep\u003c\/li\u003e\n\u003cli\u003eReduces snoring\u003c\/li\u003e\n\u003cli\u003eLessens night-time allergies and asthma attacks\u003c\/li\u003e\n\u003cli\u003eEases coughing, wheezing and sneezing\u003c\/li\u003e\n\u003cli\u003eReduces dry mouth and runny nose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cstrong\u003eWhy is The Bedroom Machine\u003c\/strong\u003e®\u003cstrong\u003e by Austin Air the best choice for me?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMedical Grade HEPA effectively removes 95% of airborne viruses that are 0.1 microns and larger.\u003c\/li\u003e\n\u003cli\u003eOur most comprehensive air purifier with a 5\u003csup\u003eth\u003c\/sup\u003estage of HEGA filtration, for the removal of viruses, bacteria, chemicals and gases\u003c\/li\u003e\n\u003cli\u003eCarbon blend that filters gases, odors and VOCs\u003c\/li\u003e\n\u003cli\u003eDeveloped to improve sleep\u003c\/li\u003e\n\u003cli\u003eKeeps your bedroom fresh and clean\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUnit Specifications \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 14.5″L x 14.5″W x 23″H\u003c\/li\u003e\n\u003cli\u003eWeight: 47 lbs.\u003c\/li\u003e\n\u003cli\u003e360° Perforated steel intake housing\u003c\/li\u003e\n\u003cli\u003eBaked on powder coat paint finish\u003c\/li\u003e\n\u003cli\u003e3 speed centrifugal Fan\u003c\/li\u003e\n\u003cli\u003eHigh efficiency motor rated for continuous use at high RPM\u003c\/li\u003e\n\u003cli\u003eCSA approved\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFilter Specifications \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSTAGE 1 – Large Particle Pre-filter. Removes particles easily seen by the naked eye (e.g. dust, hair and pet dander)\u003c\/li\u003e\n\u003cli\u003eSTAGE 2 – Medium Particle Pre-filter. Removes small to medium size particles (e.g. molds, spores and pollen)\u003c\/li\u003e\n\u003cli\u003eSTAGE 3 – Over 780 cubic inches of Activated Carbon and Zeolite Removes chemicals, gases and odors\u003c\/li\u003e\n\u003cli\u003eSTAGE 4 – 60 sq. ft. of True Medical Grade HEPA. Removes 99.97% of all particles larger than 0.3 microns and 95% of all particles larger than 0.1 microns.\u003c\/li\u003e\n\u003cli\u003eSTAGE 5 – Military Grade HEGA Carbon Cloth. HEGA (High Efficiency Gas Arrestance), providing an extremely large surface area for adsorption of chemicals, gases, viruses and bacteria\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2021-01-29T02:32:39-05:00","created_at":"2021-01-28T00:13:05-05:00","vendor":"Austin Air","type":"Air Filtration System","tags":["dropshipped","HasLeadTime"],"price":99499,"price_min":99499,"price_max":99499,"available":true,"price_varies":false,"compare_at_price":99500,"compare_at_price_min":99500,"compare_at_price_max":99500,"compare_at_price_varies":false,"variants":[{"id":38368321044661,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"AUSTIN_AIR_BEDROOM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Austin Air Bedroom Machine","public_title":null,"options":["Default Title"],"price":99499,"weight":0,"compare_at_price":99500,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/bedroom_1400x_f6c45805-2401-44cb-bdb6-feb3efc1e92b.png?v=1614829486","\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/bedroom-black_1400x_db4b50a1-32f0-4931-8265-b6bc91c70a92.png?v=1614829486","\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/Healthmate-inside_86dc1b27-9838-4347-82a2-7e75cf305ed8.jpg?v=1614829486"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/bedroom_1400x_f6c45805-2401-44cb-bdb6-feb3efc1e92b.png?v=1614829486","options":["Title"],"media":[{"alt":null,"id":20499131105461,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1400,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/bedroom_1400x_f6c45805-2401-44cb-bdb6-feb3efc1e92b.png?v=1614829479"},"aspect_ratio":1.0,"height":1400,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/bedroom_1400x_f6c45805-2401-44cb-bdb6-feb3efc1e92b.png?v=1614829479","width":1400},{"alt":null,"id":20499131760821,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1400,"width":1400,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/bedroom-black_1400x_db4b50a1-32f0-4931-8265-b6bc91c70a92.png?v=1614829484"},"aspect_ratio":1.0,"height":1400,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/bedroom-black_1400x_db4b50a1-32f0-4931-8265-b6bc91c70a92.png?v=1614829484","width":1400},{"alt":null,"id":17237386952885,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1024,"width":1024,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/Healthmate-inside_86dc1b27-9838-4347-82a2-7e75cf305ed8.jpg?v=1611905741"},"aspect_ratio":1.0,"height":1024,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/Healthmate-inside_86dc1b27-9838-4347-82a2-7e75cf305ed8.jpg?v=1611905741","width":1024}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Austin Air Bedroom Machine® is designed to give you the ultimate protection against allergens, viruses, bacteria, chemicals and VOC’s. The results of two separate clinical trials show this unit to be highly effective at removing dangerous airborne pollutants from the home. Keep the air in your bedroom free from pollution and get the good night’s sleep you deserve.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Austin Air Bedroom Machine® was used in clinical trials at the University of John Hopkins to reduce Nitrogen Dioxide levels in the homes of local residents. Nitrogen Dioxide (NO2) is a gas often present in homes where there are gas stoves. High levels of NO2 are particularly dangerous for people with COPD. The gas can dramatically increase symptoms of coughing, wheezing and chest tightness.\u003cbr\u003eThe results were dramatic. NO2 dropped in the kitchen by 27% and continued to stay low for the length of the study. Within a week NO2 levels in the bedroom dropped by 23%.\u003c\/p\u003e\n\u003cp\u003eIn a second study at Johns Hopkins, the Bedroom Machine ® was placed in the homes of women, living with a smoker, who were either pregnant or with very young babies. Again the results were impressive. It was clinically proven that running an Austin Air Bedroom Machine® will effectively remove indoor pollutants from the home, including nicotine.\u003c\/p\u003e\n\u003cp\u003eThe Bedroom Machine® addresses the broadest spectrum of air cleaning by removing sub-micron particles including allergens and asthma irritants, noxious gases, odors and chemicals. Austin Air’s 360-degree intake system draws air into all sides of the Bedroom Machine®, passing it through a comprehensive 5 stages of filtration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe result?\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eMore clean air delivered faster and more efficiently than any other air purifier on the market.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho should consider The Bedroom Machine\u003c\/strong\u003e®\u003cstrong\u003e by Austin Air?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThose looking for protection against contaminants such as viruses and bacteria.\u003c\/li\u003e\n\u003cli\u003eThose who have difficulty sleeping or have poor quality sleep\u003c\/li\u003e\n\u003cli\u003eIndividuals that suffer from COPD, allergy and asthma attacks at night\u003c\/li\u003e\n\u003cli\u003eAnyone looking to improve their overall health and wellbeing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHealth Benefits\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eReduce the viral load to minimize risk of infection or severity of disease\u003c\/li\u003e\n\u003cli\u003eStrengthened immune system\u003c\/li\u003e\n\u003cli\u003ePeaceful, uninterrupted, high quality sleep\u003c\/li\u003e\n\u003cli\u003eReduces snoring\u003c\/li\u003e\n\u003cli\u003eLessens night-time allergies and asthma attacks\u003c\/li\u003e\n\u003cli\u003eEases coughing, wheezing and sneezing\u003c\/li\u003e\n\u003cli\u003eReduces dry mouth and runny nose\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003cstrong\u003eWhy is The Bedroom Machine\u003c\/strong\u003e®\u003cstrong\u003e by Austin Air the best choice for me?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMedical Grade HEPA effectively removes 95% of airborne viruses that are 0.1 microns and larger.\u003c\/li\u003e\n\u003cli\u003eOur most comprehensive air purifier with a 5\u003csup\u003eth\u003c\/sup\u003estage of HEGA filtration, for the removal of viruses, bacteria, chemicals and gases\u003c\/li\u003e\n\u003cli\u003eCarbon blend that filters gases, odors and VOCs\u003c\/li\u003e\n\u003cli\u003eDeveloped to improve sleep\u003c\/li\u003e\n\u003cli\u003eKeeps your bedroom fresh and clean\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eUnit Specifications \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 14.5″L x 14.5″W x 23″H\u003c\/li\u003e\n\u003cli\u003eWeight: 47 lbs.\u003c\/li\u003e\n\u003cli\u003e360° Perforated steel intake housing\u003c\/li\u003e\n\u003cli\u003eBaked on powder coat paint finish\u003c\/li\u003e\n\u003cli\u003e3 speed centrifugal Fan\u003c\/li\u003e\n\u003cli\u003eHigh efficiency motor rated for continuous use at high RPM\u003c\/li\u003e\n\u003cli\u003eCSA approved\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFilter Specifications \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSTAGE 1 – Large Particle Pre-filter. Removes particles easily seen by the naked eye (e.g. dust, hair and pet dander)\u003c\/li\u003e\n\u003cli\u003eSTAGE 2 – Medium Particle Pre-filter. Removes small to medium size particles (e.g. molds, spores and pollen)\u003c\/li\u003e\n\u003cli\u003eSTAGE 3 – Over 780 cubic inches of Activated Carbon and Zeolite Removes chemicals, gases and odors\u003c\/li\u003e\n\u003cli\u003eSTAGE 4 – 60 sq. ft. of True Medical Grade HEPA. Removes 99.97% of all particles larger than 0.3 microns and 95% of all particles larger than 0.1 microns.\u003c\/li\u003e\n\u003cli\u003eSTAGE 5 – Military Grade HEGA Carbon Cloth. HEGA (High Efficiency Gas Arrestance), providing an extremely large surface area for adsorption of chemicals, gases, viruses and bacteria\u003c\/li\u003e\n\u003c\/ul\u003e"}

Austin Air Bedroom Machine

Customize Order
$ 994.99 $ 995.00
Maximum quantity available reached.
Vendor: Austin Air
Product Description

The Austin Air Bedroom Machine® is designed to give you the ultimate protection against allergens, viruses, bacteria, chemicals and VOC’s. The results of two separate clinical trials show this unit to be highly effective at removing dangerous airborne pollutants from the home. Keep the air in your bedroom free from pollution and get the good night’s sleep you deserve.

The Austin Air Bedroom Machine® was used in clinical trials at the University of John Hopkins to reduce Nitrogen Dioxide levels in the homes of local residents. Nitrogen Dioxide (NO2) is a gas often present in homes where there are gas stoves. High levels of NO2 are particularly dangerous for people with COPD. The gas can dramatically increase symptoms of coughing, wheezing and chest tightness.
The results were dramatic. NO2 dropped in the kitchen by 27% and continued to stay low for the length of the study. Within a week NO2 levels in the bedroom dropped by 23%.

In a second study at Johns Hopkins, the Bedroom Machine ® was placed in the homes of women, living with a smoker, who were either pregnant or with very young babies. Again the results were impressive. It was clinically proven that running an Austin Air Bedroom Machine® will effectively remove indoor pollutants from the home, including nicotine.

The Bedroom Machine® addresses the broadest spectrum of air cleaning by removing sub-micron particles including allergens and asthma irritants, noxious gases, odors and chemicals. Austin Air’s 360-degree intake system draws air into all sides of the Bedroom Machine®, passing it through a comprehensive 5 stages of filtration.

The result? More clean air delivered faster and more efficiently than any other air purifier on the market.

Who should consider The Bedroom Machine® by Austin Air?

  • Those looking for protection against contaminants such as viruses and bacteria.
  • Those who have difficulty sleeping or have poor quality sleep
  • Individuals that suffer from COPD, allergy and asthma attacks at night
  • Anyone looking to improve their overall health and wellbeing

Health Benefits

  • Reduce the viral load to minimize risk of infection or severity of disease
  • Strengthened immune system
  • Peaceful, uninterrupted, high quality sleep
  • Reduces snoring
  • Lessens night-time allergies and asthma attacks
  • Eases coughing, wheezing and sneezing
  • Reduces dry mouth and runny nose

 Why is The Bedroom Machine® by Austin Air the best choice for me?

  • Medical Grade HEPA effectively removes 95% of airborne viruses that are 0.1 microns and larger.
  • Our most comprehensive air purifier with a 5thstage of HEGA filtration, for the removal of viruses, bacteria, chemicals and gases
  • Carbon blend that filters gases, odors and VOCs
  • Developed to improve sleep
  • Keeps your bedroom fresh and clean

Unit Specifications 

  • Dimensions: 14.5″L x 14.5″W x 23″H
  • Weight: 47 lbs.
  • 360° Perforated steel intake housing
  • Baked on powder coat paint finish
  • 3 speed centrifugal Fan
  • High efficiency motor rated for continuous use at high RPM
  • CSA approved

Filter Specifications 

  • STAGE 1 – Large Particle Pre-filter. Removes particles easily seen by the naked eye (e.g. dust, hair and pet dander)
  • STAGE 2 – Medium Particle Pre-filter. Removes small to medium size particles (e.g. molds, spores and pollen)
  • STAGE 3 – Over 780 cubic inches of Activated Carbon and Zeolite Removes chemicals, gases and odors
  • STAGE 4 – 60 sq. ft. of True Medical Grade HEPA. Removes 99.97% of all particles larger than 0.3 microns and 95% of all particles larger than 0.1 microns.
  • STAGE 5 – Military Grade HEGA Carbon Cloth. HEGA (High Efficiency Gas Arrestance), providing an extremely large surface area for adsorption of chemicals, gases, viruses and bacteria

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

     * Reviews may be for a similar product in the same series, but a different size.

At Soul Ceramics, we want our customers to know they are getting the best prices online. When you see the blue "Lowest Price Guarantee" words on our website, we are guaranteeing that we have the lowest price anywhere on the internet. In fact, if you find another online store that offers a lower price then us within 30 days of your purchase date please let us know and we will hand you the difference - in cash.  We want you to shop confidently knowing that you are getting the absolute best price on your kiln or wheel.

To request your partial refund, e-mail us a link to the same product on our competitor's website within 30 days from the date of your order and we will process the credit accordingly.

Our Lowest Price Guarantee has some restrictions:

  • You must purchase the item from our website before requesting your partial refund
  • Special promotion offers are not eligible
  • The competitor must be an online store only
  • The website can not be a discounter or auction website, such as eBay
  • The competitor must be an Authorized Retailer for the product
  • The price on the competitor's website must include all shipping and processing fees
  • The manufacturer must be either Evenheat Kiln, Jen-Ken Kilns, or Paragon Industries
Soul Ceramics reserves the right to refuse payment for any products or offers that do not meet the required definition of a fair market price.

    At Soul Ceramics, we know how annoying it can be when you are hit with hidden costs and fees when you purchase items online. That's why we offer FREE SHIPPING* on all standard orders through Soul Ceramics.

    We even cover extra costs such as lift gate service, so the price you see is the price you pay!

    For the full details on this offer and our detailed shipping and returns policies, click here.

    Non standard orders include shipments outside of our standard shipping range, and orders that do not include a kiln or pottery wheel in the same shipment. Soul Ceramics reserves the right to inform you of shipping costs before orders are finalized.

    SOUL CERAMICS LLC EDITOR'S NOTE

    The below warranties were taken from the the respective manufacturers and last updated on June 4, 2018. Please note that these below warranties are all for reference only. While we do our best to keep these up to date; the manufacturer has the final say in what their product is warrantied as. Please reference your owner's manual upon purchase, or contact the manufacturer directly if you would like further clarification.

    Please scroll to the appropriate manufacturer's warranty for your kiln.

    Extended Warranty (Provided by Clyde)

    All Clyde warranties are for the core product only. In the case of any kilns/ovens where additional product options are available (Controllers, furniture kits, stands, blade fixtures, vents, etc.) the warranty does not apply, and the warranty would only be applicable to the kiln/oven.

    Evenheat Kiln, Inc. warranty

    Evenheat Kiln, Inc. guarantees to the original purchaser that for a period of two full years (one year for Evolution Series fiber lids) from the date of purchase the kiln will be free of defects in workmanship and materials when used under normal and proper operating conditions. Evenheat will replace or repair any defective part as specified.


    FOR THE WARRANTY TO BE EFFECTIVE THE PURCHASE MUST:

    1. Provide written proof of date of purchase. (Warranty card sent in at time of purchase.)

    2. Notify the Evenheat Distributor/Dealer from whom the kiln was purchased, within 10 days after defect has been discovered.

    3. Make kiln immediately available for inspection.

    FOR WARRANTY REPAIRS:

    1. Warranty repairs should be handled through the Distributor/Dealer from whom the kiln was purchased, who will arrange for any repairs or replacement of parts under the terms of this warranty upon receipt of the kiln (or defective part). Otherwise the defective part may be returned (postage prepaid) to Evenheat Kiln, Inc. P.O. Box 399 6949 Legion Drive Caseville, MI 48725. If, after factory examination, the original part is found to be defective, a new or repaired part will be shipped prepaid by Evenheat Kiln, Inc.

    2. If the entire kiln is to be returned to the factory, all transportation costs will be borne but he purchaser. The purchaser should notify Evenheat Kiln, Inc. (989) 856-2281 prior to shipping. Evenheat will help advise the best shipping method and if it is necessary to return the entire kiln or only certain parts. Warranty work will be performed within 30 days after defective part is returned to the factory.

    3. Evenheat Kiln, Inc. reserves the right, at its option, to replace the entire kiln or any part of it in order to fulfill its obligation under this warranty.

    THIS WARRANTY DOES NOT COVER:

    1. Freight damage, kilns altered in any way, abuse or neglect, moisture, improper storage or installation.

    2. Kiln overfired (reaching temperature higher than melting point of ware inside kiln) regardless of cause.

    3. Dawson Kiln Sitter or Limit Timer.

    4. Kilns operated on incorrect voltage.

    5. Improper electrical installation.

    6. Kiln furniture or ware.

    7. Kilns used for reduction or salt firing.

    8. Kilns used for purposes other than the firing of glass materials.

    9. Kilns operated in excess of the cone or temperature on the rating plate.

    10. Damage to Property or personal injury that may occur from kilns that are fired on or near wood floors or combustibles.

    11. Damage to property or personal injury that may occur from improper ventilation of the work area and building structure.

    This warranty is in lieu of all other warranties, expressed, or implied.
    Evenheat Kiln, Inc. neither assumes nor authorizes any Distributor/Dealer, Retailer or employee to assume for it any other obligations or liabilities in connection with Evenheat Kilns.

    This warranty is limited as specified above and excludes incidental or consequential damages. Some states or providences do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

    Evenheat Kiln, Inc.
    P.O. Box 399

    6949 Legion Road
    Caseville, MI 48725
    United States of America

    Speedball Art Products warranty

    Your Speedball Art Products Company purchase comes complete with either a 2-YEAR, 5-YEAR, or 10-YEAR WARRANTY (100% parts & labor when labor performed at Speedball Factory) depending on the product purchased - please review the product page. Speedball Art Products Company warrants this Speedball pottery wheel to be free from defects in materials and workmanship under normal use and service, that would affect its operation for a period of 10 (ten) years from the date of purchase.

    This wheel must be registered within 30 (thirty) days of the date of purchase to make the warranty effective. Registration can be performed either online at http://speedballart.com/warranty_form.php or by contacting our Customer Service Department at 800.898.7224. The obligation of this warranty shall be limited to repairing or replacing any part of the wheel which, at the discretion of the Company, shall be proven defective in materials or workmanship under normal use and service during the time period commencing with the date of purchase. Full wheel replacement will be at the discretion of the Company and will only be considered for claims initiated within 30 (thirty) days of purchase.

    This warranty does not apply to:

    1. Damage caused by accident, abuse, mishandling or dropping.

    2. Units which have been subject to unauthorized repair.

    3. Units not used in accordance with direction.

    4. Damage exceeding the cost of the product.

    5. Damage by flood, lightning or natural disaster, war declared or undeclared.


    In no case shall the Company be liable for any incidental or consequential damages for breach of this or any other warranty, express or implied, whatsoever.

    The limit of this warranty includes the product only and not any loss of work time or contract due to inability to use the wheel.

    Parts in need of repair shall be returned by the customer, shipping prepaid, to:


    Speedball Art Products
    Repairs Department
    2301 Speedball Road
    Statesville, NC 28677

    After any repair or replacement, Speedball Art Products Company will return under normal working schedule and by UPS/FedEx Ground Service (for customers in the Continental United States). Rush repair orders are accepted by purchase order and credit card payment or COD charges. Shipping charges for rush returns other than UPS/FedEx Ground Service must be prepaid via credit card or COD. No U.S. Postal returns. Be sure to wrap the product or parts securely when shipping to avoid shipping damage.

    Policy Statement for Speedball Potter’s Wheel Warranties:

    1. Warranty card must be on file at Speedball Art Products Company

    2. Customer must contact Speedball Art Products Company for Return Authorization Number prior to returning the wheel. Please write the number clearly on the outside of the box.

    3. Parts for warranty repair must be shipped prepaid to Speedball Art Products Company.

    4. Send entire system as a unit control box, motor, foot pedal and all power with no cut cords. Experience has shown that by sending the entire system, repairs are made the first time, made correctly and with less time and trouble for all parties concerned. Full wheel shipments for repair or replacement must be shipped in original packaging.

    5. Enclose a brief description of the problem, along with your name, UPS address, phone number, email address and personal address.

    6. Speedball Art Products Company will pay UPS/FedEx Ground Service shipping back to customer.

    7. Any extra charges due to a request by the customer to rush shipment are to be paid by the customer.

    8. For your convenience, troubleshooting can also be conducted by phone with one of our trained Customer Service Representatives at 800.898.7224, Monday-Friday, 8:00am-5:00pm EST.

    Jen-Ken Kiln Warranty

    JEN-KEN KILNS are warranted to the original purchaser to be free from defects in materials and workmanship when used under normal and proper conditions for the periods specified below. The warranty period begins at the date of original purchase from JEN-KEN KILNS, a JEN-KEN KILN authorized distributor or dealer.

    JEN-KEN KILNS are warranted for 2 years (1 year for the Chili Pepper) from date of original purchase.

    Dawson Kiln Sitter is warranted by a separate 1 year warranty from WP Dawson, Inc.


    PerfectFire panels are warranted by a separate 1 year plan from the manufacturer.


    FireRight panels are warranted by a separate 1 year plan from the manufacturer.


    To Claim under the Warranty, the purchaser must:

    1. Provide written proof of the date of purchase.

    2. Notify JEN-KEN KILN (or distributor/dealer) from whom the kiln was purchased.

    3. Make the kiln immediately available for inspection.

    FOR WARRANTY REPAIRS:

    1. Warranty repairs should be handled from where you purchased the kiln and they will arrange for any repairs or replacement of parts under the terms of the warranty and upon receipt of the kiln or defective part(s). Warranty work, other than that performed at the factory, DOES NOT include labor, just parts. The defective parts may be returned to JEN-KEN KILNS (postage prepaid) 3615 Ventura Drive West, Lakeland, Florida USA 33811. Include your name and address, a letter of explanation and the name and address from where you purchased the kiln. If, after factory examination the part is found to be defective, a new or repaired part will be sent prepaid by JEN-KEN KILNS.

    2. If the entire kiln is to be returned to the factory, all transportation costs are the responsibility of the purchaser. The purchaser should notify JEN-KEN KILNS (863) 648-0585 prior to shipping. We will advise the best shipping method and if it is necessary to return the whole kiln or only certain parts. Factory warranty work will be performed within 30 days after the defective part is returned to the factory.

    3. JEN-KEN KILN reserves the right, as its option, to replace the entire kiln or any part of it in order to fulfill its obligation under this warranty.

    This Warranty DOES NOT Cover:

    1. Freight damage.

    2. Kilns altered in any way after leaving our factory.

    3. Abuse or neglect, moisture, improper storage.

    4. Improper installation.

    5. Kiln Overfires (exceeding the melting temperatures of the materials being fired) regardless of the cause of the overfire. (This does not occur in kiln that are monitored while firing. If in doubt during a firing, turn the kiln off)

    6. Dawson Kiln Sitter or Limit Timer.

    7. Kilns operated on incorrect voltage.

    8. Improper electrical installation.

    9. Kiln furniture.

    10. Kiln ware.

    11. Kilns used for purposes other than firing ceramic or glass materials.

    12. Kilns operated in excess of the temperature rating of the kiln.

    13. Damage that may occur from kilns that are fired on or near combustible materials (i.e.: wood floors).

    This Warranty is in lieu of all other warranties, expressed or implied. JEN-KEN KILN neither assumes nor authorizes any distributor, dealer, retailer or employee to assume for it any other obligation of liabilities in connection with JENKEN KILNS.

    This warranty is limited, as specified above and excludes incidental or consequential damages, so the above limitations or exclusions may not apply to you.

    This warranty give you specific rights and you may also have other rights why vary from state to state.


    JEN-KEN KILNS
    Manufactured by Sir Ramic Porcelain, Inc.
    3615 Ventura Drive West Lakeland, Florida USA 33811
    (863) 648-0585

     

    Olympic Kilns Warranty

    Warranty Registration

    This Warranty Is Applicable to All Kilns Manufactured by Olympic Kilns That Are Used for Ceramics, Pottery and Glass.

    Cone 10 Kilns Have a One-Year Warranty and All Other Kilns Have a Two-Year Warranty. Certain Parts, Thermocouple, Kiln Sitter Tube Assembly, Are Not Covered Under Warranty, Nor Is Kiln Furniture.

    Haugen Manufacturing, Incorporated guarantees to the original purchaser that any defects in OLYMPIC KILNS which become apparent within two years (one year for the Dawson Kiln Sitter and safety timer which is covered by warranty from W. P. Dawson, Inc. and kilns rated at cone 10) will be remedied as specified below.

    Our warranty, of course, does not cover any kiln damaged or altered by you or others after it leaves our factory. Our warranty does not cover damage due to reduction or salt firing, over-firing, exceeding the maximum cone or temperature ratings, improper installation, use of electrical voltages different than those specified, or firing material other than ceramics.

    If a defect of manufacturer becomes apparent, and your retailer does not resolve it to your satisfaction, we will in the following manner: Within (6;) days of the first indication of a defect, tell us in writing of defect, and the date, place and proof of the your purchase. We will contact you to determine what parts seem to warrant repair and to instruct you as to shipment of the kiln parts. You will dismantle, package, and ship the parts we request (and no others), to us at your cost, freight prepaid. If the kiln has a defect of manufacture we will repair, replace or refund as is appropriate, within (30) days. We will ship to you at our cost in your package, for you to reinstall at your cost. If the parts shipped by you to us are in need of
    repair or replacement for something which is not covered by this warranty, we will not perform the work until you have authorized the work and made arrangements for payment. If substantially an entire kiln is returned for repair under warranty, you will prepay the cost of packaging and shipping both to and from
    the factory.

    We shall in no event be liable for injuries to persons or property or for incidental, contingent, special or consequential damages arising from the use of our products. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

    OLYMPIC KILNS
    HAUGEN MANUFACTURING, INC.
    P. O. BOX 1347
    4225 THURMON TANNER ROAD FLOWERY BRANCH, GA 30542
    (770) 967-4009

    Paragon Kilns

    Warranty Registration

    Paragon kilns are warranted to the original purchaser by Paragon Industries, L.P. (herein Paragon), subject to the listed exclusions below, to be free of defects in workmanship for the periods specified below. The warranty period begins from date of shipment from the Paragon factory unless date of original purchase from an authorized Paragon distributor or dealer can be established.

    Warranty Periods

    QuickFire kilns: 3 months

    BlueBirds, HT-series, Home Artist, FiberFuse-16, J-series, KM-Series, SC-series, and Vulcans: 1 year

    (Vulcan elements are not warranted.)

    Kilns with a maximum temperature rating above 2300ºF (except Dragons, Iguana and Vikings): 1 year

    TnF 2 controllers, GF, GL, and Fusion series kilns rated 2000°F or lower and all other kilns not listed in this section with a maximum temperature rated 2300ºF or lower: 2 years

    Controllers: Sentry (12 key): 2 ½ years; Sentry Xpress (3 key): the length of the new kiln’s warranty or 1 year on replacement controllers for older kilns.

    Dragon, Super Dragon, Iguana and Viking kilns: 2 years. S-Type thermocouple and APM elements fall within the 2 year warranty. Standard elements on these models: 6 months. Sentry controller on these models: 2 ½ years. Type-K thermocouple is not warranted on the Dragon, Iguana and Viking.

    These warranty periods apply unless otherwise agreed to in writing.

    This warranty excludes: 1) Kilns or furnaces damaged by overfiring (exceeding the melting temperature of the material being fired) regardless of cause of overfiring; 2) Ware, tools, kiln furniture, or anything inside damaged by overfire; 3) Kilns allowed to exceed the maximum temperature shown on kiln’s nameplate, regardless of cause; 4) Kilns subjected to abuse, neglect, freight damage or improper storage; 5) Kilns used for either reduction or salt firing, 6) Kilns damaged by improper electrical installation; 7) Kilns used for purposes other than firing ceramics, glass, heat treating, or the purpose for which it was intended; 8) Element burnout caused by contact with foreign materials; 9) The patented Dawson Kiln Sitter and/or Limit Timer manufactured by W.P. Dawson, Inc., 399 Thor Place, Brea, California 92621.

    WARRANTY COVERAGE EXTENDS ONLY TO THE ORIGINAL PURCHASER AND DOES NOT COVER REPLACEMENT OF PARTS THAT ARE, BY THEIR NATURE, EXPENDABLE. THIS WARRANTY IS VOIDED IF THE PRODUCT IS ADVERSELY AFFECTED BY ATTACHING ANY FEATURE OR DEVICE TO IT, OR IS IN ANY WAY TAMPERED WITH OR MODIFIED WITHOUT EXPRESS WRITTEN PERMISSION FROM PARAGON INDUSTRIES, L.P.

    Paragon Industries, L.P., will repair or replace any parts that become defective under normal and proper use during the specified period for the kiln purchased, providing the kiln has not been subjected to misuse or the listed exclusions. Paragon will furnish and install replacement parts at the factory with transportation costs to and from the factory paid by the owner; or upon receipt of defective parts at the factory, and after factory examination of the defect, Paragon will furnish replacement parts, complete with installation instructions, shipped postpaid to owner. The warranty on the repaired and/or replaced parts will be limited to the unexpired term of the original warranty.

    Any claim for adjustment under this warranty must include name and address of dealer from whom kiln was originally purchased. Repair or replacement of any defective parts shall fulfill all obligations of Paragon. No other obligations or liabilities are assumed in connection with Paragon kilns nor does Paragon Industries, L.P. authorize its distributors or dealers to assume any other obligations or liabilities on its behalf.

    THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL PARAGON INDUSTRIES, L.P. BE LIABLE FOR ANY LOSS OF PROFITS OR ANY INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF ANY SUCH DEFECT IN MATERIAL OR WORKMANSHIP. NOTE: SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

    This agreement is made in the State of Texas and its validity, construction, and all rights under it will be governed by the laws of the State of Texas. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

    Paragon Industries, L.P.,
    2011 South Town East Blvd.
    Mesquite, Texas 75149-1122
    1-800-876-4328
    Fax: 972-222-0646

    ★ Verified Reviews

    Let customers speak for us

    464 reviews
    95%
    (442)
    5%
    (22)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    M
    Evenheat Knife Oven - KO 22.5
    Marc Chord (Portland, US)
    Works great

    Even heat 22.5 ko came 100%assembled and ready to go. Went with quite relays and temp only deviates +~4deg. Great service and response from soul ceramics when I had one little problem when it was totally my screw up

    D
    Evenheat Knife Oven - KH 418
    Daniel Schulze (Milwaukee, US)
    Kiln worked good.

    My only complaint is that the door mount is a sloppy design. The door sits crooked and a mistake screw hole was drilled. I will fix it eventually but for the money I spent a little more care should have went into it.

    A
    Evenheat Heat Treat Oven - LB 27
    Alex Coward (San Dimas, US)
    The LB 27 oven.

    This team is awesome, TJ, Alex, & Lea took care of all the transactions, ordering, Q&A, additional parts, Shipping etc. Kept me up to date weekly as the manufacturing process did increase. These small companies Evenheat and Soul ceramics are true MADE IN THE USA companies. I would absolutely recommend them. I love my LB27. I can now make 2 foot gold bars

    A
    Jen-Ken AF3C 1822 Ceramic Kiln
    Alan Wilkerson (Greenbrier, US)
    Great price, great service, easy ordering!

    Lots of kiln options, kiln was freight delivered perfectly... customer service was spot on and always very timely! Lea must not sleep 😂.... No complaints at all! I'm firing my first bisque to condition the elements as I write this... i cant wait to fire my pottery and see how it all turns out! Got a batch waiting to bisque.... I've been wanting and waiting to purchase a digital kiln for years now.... you guys made it easy!

    J
    Jen-Ken AF3C 11/9 Ceramic Kiln
    Jessica Brooks (Oxford, US)
    Perfect, simple, professional

    I LOVE my new kiln!! I am new to pottery and ceramics and this is my first kiln. Great price, great customer service, easy to order and exactly as described! perfect fit for my home as it is small and fits a standard home electrical outlet without having to make any electrical modifications. SO easy to use with easy-to-read manual— my very first projects fired perfectly and I have never fired a kiln in my life before now. Perfect 04-06 range bisque and glaze just as described, which is exactly what I wanted. I couldn’t be happier with or more proud to own this equipment and everything that came with. Zero issues whatsoever with ordering and delivery, and I really appreciate that it arrived a week early with frequent communication and updates from the time I ordered, to the time it arrived, and great follow-up even after a couple of weeks of use. I never had to contact Soul Ceramics once regarding my order because I was provided all the information and updates I needed and more as my order was being fulfilled… but I have no doubt that any concerns, issues or questions I might have had would have been addressed and resolved promptly and professionally. seriously impressive, and this is a dream come true for me as a maker. I really can’t say enough about how satisfied and excited I am with this company and equipment. Thank you so much for a wonderful product and outstanding customer service!