Authorized Distributor

Free Shipping For Orders Over $50

{"id":6761494017,"title":"Jen-Ken AF3C 11\/9 Ceramic Kiln","handle":"jen-ken-af3c-11-9-ceramic-kiln","description":"\u003cp\u003e\u003cstrong\u003eWhen purchasing from this product page, please note that you are receiving a special price to have this made-to-order and shipped directly from the factory. There is a lead-time on made-to-order items - please contact us for more information.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you'd like to receive this product ASAP - You're in luck! We have these in-stock and you simply need to purchase from \u003ca href=\"https:\/\/www.soulceramics.com\/products\/jen-ken-af3c-11-9-ceramic-kiln-in-stock\"\u003ethis product page\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Jen-Ken AF3C 11\/9 Ceramic Kiln is the perfect kiln for new low-fire ceramic hobbyists. Made to perform perfect 04-06 firings on standard 120v current, this kiln can be used on a standard home outlet. This kiln is great for small pieces, test firings, and perfecting designs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Orton AF3C controller comes equipped with easy to use Cone Fire programs. The AF3C 11\/9 can also be used for fusing and slumping glass. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe promise to have the lowest price online for this kiln, and will always beat any competitor's price. We also offer free shipping on all standard orders, so the price you see here is the price you pay. \u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis kiln comes with the following\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efree\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eaccessories:\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eStand\u003c\/li\u003e\n\u003cli\u003eManual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch5\u003e\u003cstrong\u003eSolid State Relay\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eA Solid State Relay is hands down \u003cstrong\u003ethe best investment you can make in your kiln!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe relay is what controls the power cycling of the elements in the kiln and they need to be able to withstand a ton of power as they do so. The solid state relays are incredibly efficient compared to the standard mechanical relays and are able to operate at much faster speeds. What this equates to is \u003cstrong\u003eincredibly tight\u003c\/strong\u003e temperature control for accurate firings, longer element life, and savings on your electrical bill!\u003c\/p\u003e\n\u003cp\u003eThe standard mechanical relays have moving parts which cause wear and tear over the years and will eventually need to be replaced; however with a solid state relay it's likely to last the entire life of the kiln! You will \u003cstrong\u003esave you money and time\u003c\/strong\u003e by never needing to worry about this in the future!\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eController Selection\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eJen-Ken has close relationships with the manufacturers of a variety of digital controllers, such as those from SDS Industries and Orton. This means you will have nothing but the best the best in terms of performance and accuracy in your firings.\u003c\/p\u003e\n\u003cp\u003eWith a selection of multiple controllers available - you can choose exactly what fits your needs.\u003c\/p\u003e\n\u003ch6\u003eTAP Touchscreen Smart Controller by SDS Industries\u003c\/h6\u003e\n\u003cp style=\"float: right;\"\u003eThe top of the line. The bread and butter. The cream of the crop. The controller for those who want to make their lives easier, improve their craft, and make incredible quality products.\u003cbr\u003e\u003cbr\u003eThis is our \u003cstrong\u003etop selling controller\u003c\/strong\u003e - And for good reason!\u003c\/p\u003e\n\u003cp style=\"float: right;\"\u003e\u003cimg alt=\"TAP Smart Controller\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/files\/tap-smart-controller_medium.png?3063849439708355884\" style=\"float: right; margin: 5px;\"\u003eThe TAP Smart Controller is without a doubt the best choice on the market right now - It's easy to use, has stellar performance, and is packed full with features!\u003cbr\u003e\u003cbr\u003eIt has more memory than any other controller, allowing you to more easily utilize, revise, and save many different kinds of firing programs.\u003cbr\u003e\u003cbr\u003eStorage for firing programs is virtually unlimited! Create as many profiles, with as many steps as you'd like - you won't be limited by this controller.\u003cbr\u003e\u003cbr\u003eOur favorite part though: When ordered with the Wi-Fi Dongle, you can control everything from any device! Prefer to work on your computer or tablet - how about your phone?\u003c\/p\u003e\n\u003cp style=\"float: right;\"\u003e \u003c\/p\u003e\n\u003cp style=\"float: right;\"\u003e \u003c\/p\u003e\n\u003cp\u003eWith an internet connection to your TAP Smart Controller, updates from SDS Industries can be applied to your controller automatically - ensuring you always have the most up-to-date software for years to come!\u003c\/p\u003e\n\u003cp\u003eEasily adjust the in-progress firing, skip steps, and view all graphical information on your firing with just a \"TAP\"!\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe amount of time you save by working with the TAP Smart Controller pays for itself for years to come - you'll be so happy with this investment that you won't know how you managed so long without it.\u003c\/p\u003e\n\u003cp\u003eThe TAP Smart Controller supports the Loud Alarm option.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch6\u003eOrton AutoFire 12-Key (AF\/AFG) Controller\u003c\/h6\u003e\n\u003cimg alt=\"AF 12-Key\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/files\/af_12-key_medium.jpg\" style=\"float: right; margin: 5px;\"\u003e\n\u003cp\u003eThe Orton AutoFire 3000 12-Key (AF\/AFG) controller has 12 keys for programming.\u003c\/p\u003e\n\u003cp\u003eThe Orton AF 12-key supports up to 4 custom firing programs.\u003c\/p\u003e\n\u003cp\u003eOrton controllers use P-I-D control algorithms to tightly control kiln temperature. This eliminates temperature cycling. Cycling occurs when the controller turns the kiln on or off in a way where the actual temperature does not closely follow the desired firing schedule.\u003c\/p\u003e\n\u003cp\u003eOrton controllers store all of the program information in memory when shut off. This is helpful for if power is lost in the middle of a firing, the controller remembers how far the program has progressed and determines if it can resume once power has been restored.\u003c\/p\u003e\n\u003cp\u003eThe AutoFire controller can add hold time to firings already in progress, edit programs in progress, and even skip in progress! These are some of the most useful features that are offered in both the TAP and AF 12-key controllers.\u003c\/p\u003e\n\u003ch6\u003eOrton AutoFire 3-Key (AF3P\/AF3C) Controller\u003c\/h6\u003e\n\u003cimg alt=\"AF 3-Key\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/files\/af3c-af3p_medium.jpg\" style=\"float: right; margin: 5px;\"\u003e\n\u003cp\u003eThe AF 3-Key (AutoFire Express) is our basic, no frills controller. It gets the job done, but does not offer nearly as much flexibility as the others. The AF 3-Key has the ability to store up to 6 eight-step custom firing profiles.\u003c\/p\u003e\n\u003cp\u003eWhile the AF 3-Key controller is fantastic, and certainly will help you achieve your end goals - we always recommend an upgrade to the AF 12-key or TAP Smart as the controller is the heart and brains of your kiln. It's what you'll be working with day in and day out, and being able to take advantage of the expanded user interface on the other controllers as well as their overwhelming number of features - we've always found that users are happiest upgrading.\u003c\/p\u003e\n\u003cp\u003eThis is a good choice if you're only planning to occasionally use your oven and do not want room to expand in the future. \u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eFurniture Kit\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eFurniture Kits are \u003cstrong\u003enecessary accessories\u003c\/strong\u003e for any kiln owner as firing directly on the kiln floor is not only bad for the kiln, but your pieces as well. In addition to this, they're also useful! A furniture kit will allow you to stack multiple shelves on top of one another in order to maximize the useable space when firing smaller pieces.\u003c\/p\u003e\n\u003cp\u003eIf you have one that will fit this kiln size already, then you're in luck! But if not, you'll want to ensure you add this to your order as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFurniture Kit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Full Shelf\u003c\/li\u003e\n\u003cli\u003eThree (3) 1\" Post\u003c\/li\u003e\n\u003cli\u003eThree (3) 2\" Post\u003c\/li\u003e\n\u003cli\u003eThree (3) 4\" Post\u003c\/li\u003e\n\u003cli\u003eOne (1) 1lb. Shelf Primer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKiln furniture can be special ordered separately, but if done so the cost is ~10-20% higher and will incur a separate shipping charge. It's best to include this on your initial order of the kiln.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003e* Received shelves may contain surface imperfections such as scratches, discoloration or rough edge. These possible imperfections are understood and accepted by the buyer.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h5\u003e","published_at":"2016-06-29T13:39:00-04:00","created_at":"2016-06-29T14:07:44-04:00","vendor":"Jen-Ken","type":"Kiln","tags":["dropshipped","function:Ceramics","HasLeadTime","jenken","size:Small","voltage:120V"],"price":90799,"price_min":90799,"price_max":90799,"available":true,"price_varies":false,"compare_at_price":113500,"compare_at_price_min":113500,"compare_at_price_max":113500,"compare_at_price_varies":false,"variants":[{"id":12342637199454,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"JENKEN_AF3C_11_9","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Jen-Ken AF3C 11\/9 Ceramic Kiln","public_title":null,"options":["Default Title"],"price":90799,"weight":0,"compare_at_price":113500,"inventory_quantity":-193,"inventory_management":null,"inventory_policy":"continue","barcode":"","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/jen-ken-jen-ken-af3c-119-ceramic-kiln-kiln-soul-ceramics-2.jpg?v=1620790338","\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/jen-ken-jen-ken-af3c-119-ceramic-kiln-kiln-soul-ceramics.jpg?v=1620790338","\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/jen-ken-jen-ken-af3c-119-ceramic-kiln-kiln-soul-ceramics-3.jpg?v=1557468030"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/jen-ken-jen-ken-af3c-119-ceramic-kiln-kiln-soul-ceramics-2.jpg?v=1620790338","options":["Title"],"media":[{"alt":"Jen-Ken AF3C 11\/9 Ceramic Kiln - Soul Ceramics","id":78505017438,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1049,"width":1049,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/jen-ken-jen-ken-af3c-119-ceramic-kiln-kiln-soul-ceramics-2.jpg?v=1620790338"},"aspect_ratio":1.0,"height":1049,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/jen-ken-jen-ken-af3c-119-ceramic-kiln-kiln-soul-ceramics-2.jpg?v=1620790338","width":1049},{"alt":"Jen-Ken AF3C 11\/9 Ceramic Kiln - Soul Ceramics","id":78504984670,"position":2,"preview_image":{"aspect_ratio":1.0,"height":1000,"width":1000,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/jen-ken-jen-ken-af3c-119-ceramic-kiln-kiln-soul-ceramics.jpg?v=1620790338"},"aspect_ratio":1.0,"height":1000,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/jen-ken-jen-ken-af3c-119-ceramic-kiln-kiln-soul-ceramics.jpg?v=1620790338","width":1000},{"alt":"Jen-Ken AF3C 11\/9 Ceramic Kiln - Soul Ceramics","id":78505050206,"position":3,"preview_image":{"aspect_ratio":1.0,"height":529,"width":529,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/jen-ken-jen-ken-af3c-119-ceramic-kiln-kiln-soul-ceramics-3.jpg?v=1557468030"},"aspect_ratio":1.0,"height":529,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/products\/jen-ken-jen-ken-af3c-119-ceramic-kiln-kiln-soul-ceramics-3.jpg?v=1557468030","width":529}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003e\u003cstrong\u003eWhen purchasing from this product page, please note that you are receiving a special price to have this made-to-order and shipped directly from the factory. There is a lead-time on made-to-order items - please contact us for more information.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you'd like to receive this product ASAP - You're in luck! We have these in-stock and you simply need to purchase from \u003ca href=\"https:\/\/www.soulceramics.com\/products\/jen-ken-af3c-11-9-ceramic-kiln-in-stock\"\u003ethis product page\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Jen-Ken AF3C 11\/9 Ceramic Kiln is the perfect kiln for new low-fire ceramic hobbyists. Made to perform perfect 04-06 firings on standard 120v current, this kiln can be used on a standard home outlet. This kiln is great for small pieces, test firings, and perfecting designs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe Orton AF3C controller comes equipped with easy to use Cone Fire programs. The AF3C 11\/9 can also be used for fusing and slumping glass. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWe promise to have the lowest price online for this kiln, and will always beat any competitor's price. We also offer free shipping on all standard orders, so the price you see here is the price you pay. \u003c\/span\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThis kiln comes with the following\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003efree\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eaccessories:\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eStand\u003c\/li\u003e\n\u003cli\u003eManual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch5\u003e\u003cstrong\u003eSolid State Relay\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eA Solid State Relay is hands down \u003cstrong\u003ethe best investment you can make in your kiln!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe relay is what controls the power cycling of the elements in the kiln and they need to be able to withstand a ton of power as they do so. The solid state relays are incredibly efficient compared to the standard mechanical relays and are able to operate at much faster speeds. What this equates to is \u003cstrong\u003eincredibly tight\u003c\/strong\u003e temperature control for accurate firings, longer element life, and savings on your electrical bill!\u003c\/p\u003e\n\u003cp\u003eThe standard mechanical relays have moving parts which cause wear and tear over the years and will eventually need to be replaced; however with a solid state relay it's likely to last the entire life of the kiln! You will \u003cstrong\u003esave you money and time\u003c\/strong\u003e by never needing to worry about this in the future!\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eController Selection\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eJen-Ken has close relationships with the manufacturers of a variety of digital controllers, such as those from SDS Industries and Orton. This means you will have nothing but the best the best in terms of performance and accuracy in your firings.\u003c\/p\u003e\n\u003cp\u003eWith a selection of multiple controllers available - you can choose exactly what fits your needs.\u003c\/p\u003e\n\u003ch6\u003eTAP Touchscreen Smart Controller by SDS Industries\u003c\/h6\u003e\n\u003cp style=\"float: right;\"\u003eThe top of the line. The bread and butter. The cream of the crop. The controller for those who want to make their lives easier, improve their craft, and make incredible quality products.\u003cbr\u003e\u003cbr\u003eThis is our \u003cstrong\u003etop selling controller\u003c\/strong\u003e - And for good reason!\u003c\/p\u003e\n\u003cp style=\"float: right;\"\u003e\u003cimg alt=\"TAP Smart Controller\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/files\/tap-smart-controller_medium.png?3063849439708355884\" style=\"float: right; margin: 5px;\"\u003eThe TAP Smart Controller is without a doubt the best choice on the market right now - It's easy to use, has stellar performance, and is packed full with features!\u003cbr\u003e\u003cbr\u003eIt has more memory than any other controller, allowing you to more easily utilize, revise, and save many different kinds of firing programs.\u003cbr\u003e\u003cbr\u003eStorage for firing programs is virtually unlimited! Create as many profiles, with as many steps as you'd like - you won't be limited by this controller.\u003cbr\u003e\u003cbr\u003eOur favorite part though: When ordered with the Wi-Fi Dongle, you can control everything from any device! Prefer to work on your computer or tablet - how about your phone?\u003c\/p\u003e\n\u003cp style=\"float: right;\"\u003e \u003c\/p\u003e\n\u003cp style=\"float: right;\"\u003e \u003c\/p\u003e\n\u003cp\u003eWith an internet connection to your TAP Smart Controller, updates from SDS Industries can be applied to your controller automatically - ensuring you always have the most up-to-date software for years to come!\u003c\/p\u003e\n\u003cp\u003eEasily adjust the in-progress firing, skip steps, and view all graphical information on your firing with just a \"TAP\"!\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003eThe amount of time you save by working with the TAP Smart Controller pays for itself for years to come - you'll be so happy with this investment that you won't know how you managed so long without it.\u003c\/p\u003e\n\u003cp\u003eThe TAP Smart Controller supports the Loud Alarm option.\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ch6\u003eOrton AutoFire 12-Key (AF\/AFG) Controller\u003c\/h6\u003e\n\u003cimg alt=\"AF 12-Key\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/files\/af_12-key_medium.jpg\" style=\"float: right; margin: 5px;\"\u003e\n\u003cp\u003eThe Orton AutoFire 3000 12-Key (AF\/AFG) controller has 12 keys for programming.\u003c\/p\u003e\n\u003cp\u003eThe Orton AF 12-key supports up to 4 custom firing programs.\u003c\/p\u003e\n\u003cp\u003eOrton controllers use P-I-D control algorithms to tightly control kiln temperature. This eliminates temperature cycling. Cycling occurs when the controller turns the kiln on or off in a way where the actual temperature does not closely follow the desired firing schedule.\u003c\/p\u003e\n\u003cp\u003eOrton controllers store all of the program information in memory when shut off. This is helpful for if power is lost in the middle of a firing, the controller remembers how far the program has progressed and determines if it can resume once power has been restored.\u003c\/p\u003e\n\u003cp\u003eThe AutoFire controller can add hold time to firings already in progress, edit programs in progress, and even skip in progress! These are some of the most useful features that are offered in both the TAP and AF 12-key controllers.\u003c\/p\u003e\n\u003ch6\u003eOrton AutoFire 3-Key (AF3P\/AF3C) Controller\u003c\/h6\u003e\n\u003cimg alt=\"AF 3-Key\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0836\/2769\/files\/af3c-af3p_medium.jpg\" style=\"float: right; margin: 5px;\"\u003e\n\u003cp\u003eThe AF 3-Key (AutoFire Express) is our basic, no frills controller. It gets the job done, but does not offer nearly as much flexibility as the others. The AF 3-Key has the ability to store up to 6 eight-step custom firing profiles.\u003c\/p\u003e\n\u003cp\u003eWhile the AF 3-Key controller is fantastic, and certainly will help you achieve your end goals - we always recommend an upgrade to the AF 12-key or TAP Smart as the controller is the heart and brains of your kiln. It's what you'll be working with day in and day out, and being able to take advantage of the expanded user interface on the other controllers as well as their overwhelming number of features - we've always found that users are happiest upgrading.\u003c\/p\u003e\n\u003cp\u003eThis is a good choice if you're only planning to occasionally use your oven and do not want room to expand in the future. \u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003eFurniture Kit\u003c\/strong\u003e\u003c\/h5\u003e\n\u003cp\u003eFurniture Kits are \u003cstrong\u003enecessary accessories\u003c\/strong\u003e for any kiln owner as firing directly on the kiln floor is not only bad for the kiln, but your pieces as well. In addition to this, they're also useful! A furniture kit will allow you to stack multiple shelves on top of one another in order to maximize the useable space when firing smaller pieces.\u003c\/p\u003e\n\u003cp\u003eIf you have one that will fit this kiln size already, then you're in luck! But if not, you'll want to ensure you add this to your order as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFurniture Kit includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo (2) Full Shelf\u003c\/li\u003e\n\u003cli\u003eThree (3) 1\" Post\u003c\/li\u003e\n\u003cli\u003eThree (3) 2\" Post\u003c\/li\u003e\n\u003cli\u003eThree (3) 4\" Post\u003c\/li\u003e\n\u003cli\u003eOne (1) 1lb. Shelf Primer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKiln furniture can be special ordered separately, but if done so the cost is ~10-20% higher and will incur a separate shipping charge. It's best to include this on your initial order of the kiln.\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003e* Received shelves may contain surface imperfections such as scratches, discoloration or rough edge. These possible imperfections are understood and accepted by the buyer.\u003c\/small\u003e\u003c\/p\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h5\u003e\n\u003ch5\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/h5\u003e"}

Jen-Ken AF3C 11/9 Ceramic Kiln

Customize Order
$ 907.99 $ 1,135.00
Maximum quantity available reached.
Vendor: Jen-Ken
Product Description

When purchasing from this product page, please note that you are receiving a special price to have this made-to-order and shipped directly from the factory. There is a lead-time on made-to-order items - please contact us for more information.

If you'd like to receive this product ASAP - You're in luck! We have these in-stock and you simply need to purchase from this product page.

The Jen-Ken AF3C 11/9 Ceramic Kiln is the perfect kiln for new low-fire ceramic hobbyists. Made to perform perfect 04-06 firings on standard 120v current, this kiln can be used on a standard home outlet. This kiln is great for small pieces, test firings, and perfecting designs.

The Orton AF3C controller comes equipped with easy to use Cone Fire programs. The AF3C 11/9 can also be used for fusing and slumping glass. 

We promise to have the lowest price online for this kiln, and will always beat any competitor's price. We also offer free shipping on all standard orders, so the price you see here is the price you pay. 

This kiln comes with the following free accessories:

  • Stand
  • Manual
Solid State Relay

A Solid State Relay is hands down the best investment you can make in your kiln!

The relay is what controls the power cycling of the elements in the kiln and they need to be able to withstand a ton of power as they do so. The solid state relays are incredibly efficient compared to the standard mechanical relays and are able to operate at much faster speeds. What this equates to is incredibly tight temperature control for accurate firings, longer element life, and savings on your electrical bill!

The standard mechanical relays have moving parts which cause wear and tear over the years and will eventually need to be replaced; however with a solid state relay it's likely to last the entire life of the kiln! You will save you money and time by never needing to worry about this in the future!

Controller Selection

Jen-Ken has close relationships with the manufacturers of a variety of digital controllers, such as those from SDS Industries and Orton. This means you will have nothing but the best the best in terms of performance and accuracy in your firings.

With a selection of multiple controllers available - you can choose exactly what fits your needs.

TAP Touchscreen Smart Controller by SDS Industries

The top of the line. The bread and butter. The cream of the crop. The controller for those who want to make their lives easier, improve their craft, and make incredible quality products.

This is our top selling controller - And for good reason!

TAP Smart ControllerThe TAP Smart Controller is without a doubt the best choice on the market right now - It's easy to use, has stellar performance, and is packed full with features!

It has more memory than any other controller, allowing you to more easily utilize, revise, and save many different kinds of firing programs.

Storage for firing programs is virtually unlimited! Create as many profiles, with as many steps as you'd like - you won't be limited by this controller.

Our favorite part though: When ordered with the Wi-Fi Dongle, you can control everything from any device! Prefer to work on your computer or tablet - how about your phone?

 

 

With an internet connection to your TAP Smart Controller, updates from SDS Industries can be applied to your controller automatically - ensuring you always have the most up-to-date software for years to come!

Easily adjust the in-progress firing, skip steps, and view all graphical information on your firing with just a "TAP"!

The amount of time you save by working with the TAP Smart Controller pays for itself for years to come - you'll be so happy with this investment that you won't know how you managed so long without it.

The TAP Smart Controller supports the Loud Alarm option.

Orton AutoFire 12-Key (AF/AFG) Controller
AF 12-Key

The Orton AutoFire 3000 12-Key (AF/AFG) controller has 12 keys for programming.

The Orton AF 12-key supports up to 4 custom firing programs.

Orton controllers use P-I-D control algorithms to tightly control kiln temperature. This eliminates temperature cycling. Cycling occurs when the controller turns the kiln on or off in a way where the actual temperature does not closely follow the desired firing schedule.

Orton controllers store all of the program information in memory when shut off. This is helpful for if power is lost in the middle of a firing, the controller remembers how far the program has progressed and determines if it can resume once power has been restored.

The AutoFire controller can add hold time to firings already in progress, edit programs in progress, and even skip in progress! These are some of the most useful features that are offered in both the TAP and AF 12-key controllers.

Orton AutoFire 3-Key (AF3P/AF3C) Controller
AF 3-Key

The AF 3-Key (AutoFire Express) is our basic, no frills controller. It gets the job done, but does not offer nearly as much flexibility as the others. The AF 3-Key has the ability to store up to 6 eight-step custom firing profiles.

While the AF 3-Key controller is fantastic, and certainly will help you achieve your end goals - we always recommend an upgrade to the AF 12-key or TAP Smart as the controller is the heart and brains of your kiln. It's what you'll be working with day in and day out, and being able to take advantage of the expanded user interface on the other controllers as well as their overwhelming number of features - we've always found that users are happiest upgrading.

This is a good choice if you're only planning to occasionally use your oven and do not want room to expand in the future. 

Furniture Kit

Furniture Kits are necessary accessories for any kiln owner as firing directly on the kiln floor is not only bad for the kiln, but your pieces as well. In addition to this, they're also useful! A furniture kit will allow you to stack multiple shelves on top of one another in order to maximize the useable space when firing smaller pieces.

If you have one that will fit this kiln size already, then you're in luck! But if not, you'll want to ensure you add this to your order as well.

Furniture Kit includes:

  • Two (2) Full Shelf
  • Three (3) 1" Post
  • Three (3) 2" Post
  • Three (3) 4" Post
  • One (1) 1lb. Shelf Primer

Kiln furniture can be special ordered separately, but if done so the cost is ~10-20% higher and will incur a separate shipping charge. It's best to include this on your initial order of the kiln.

* Received shelves may contain surface imperfections such as scratches, discoloration or rough edge. These possible imperfections are understood and accepted by the buyer.

Product Specifications
Model AF3C 11/9
Max Temperature 2100 °F
Inside Dimensions 11" x 9"
Volume (Cu. Ft.) 0.5
Power Plug Type NEMA 5-15
Voltage 120
Watts 1,800
Amps 15
Shipping Weight (lbs.) 70
Product Weight (lbs.) 50
Shipping Lead Time Made To Order - Please Inquire
Warranty 2 Year
* Watts, Amps, Max Temperature, & Power Receptacle are all based on the standard model. A change in voltage, wiring phase, or addition of certain features such as additional elements may cause a deviation from these specifications.
* Image may differ from product received depending on product options chosen.

Customer Reviews

Based on 18 reviews
94%
(17)
6%
(1)
0%
(0)
0%
(0)
0%
(0)
J
Jessica Brooks (Oxford, US)
Perfect, simple, professional

I LOVE my new kiln!! I am new to pottery and ceramics and this is my first kiln. Great price, great customer service, easy to order and exactly as described! perfect fit for my home as it is small and fits a standard home electrical outlet without having to make any electrical modifications. SO easy to use with easy-to-read manual— my very first projects fired perfectly and I have never fired a kiln in my life before now. Perfect 04-06 range bisque and glaze just as described, which is exactly what I wanted. I couldn’t be happier with or more proud to own this equipment and everything that came with. Zero issues whatsoever with ordering and delivery, and I really appreciate that it arrived a week early with frequent communication and updates from the time I ordered, to the time it arrived, and great follow-up even after a couple of weeks of use. I never had to contact Soul Ceramics once regarding my order because I was provided all the information and updates I needed and more as my order was being fulfilled… but I have no doubt that any concerns, issues or questions I might have had would have been addressed and resolved promptly and professionally. seriously impressive, and this is a dream come true for me as a maker. I really can’t say enough about how satisfied and excited I am with this company and equipment. Thank you so much for a wonderful product and outstanding customer service!

B
Ben Malone (Mobile, US)
Jen Ken 5 Stars

Soul Ceramics customer service is second to none. They do a great job of keeping you updated throughout the entire process and let you know exactly what to expect at every step. This was truly a great buying experience.

It would be nice to have some more pictures on the website that give a better idea of the size of this kiln. It turned out to be exactly what we needed but felt like we couldn’t find any pictures to give the size justice anywhere.

T
Terissa Milton (El Paso, US)
Jen Ken

Great shop, for my odd request of a 15 plug instead of a 20 plug, this jen ken was the only kiln I could find, this large at 15. It 's still small, not for large vases, but not a bad size for smaller objects. It's heating well, and keeps the heat ramping down; after 800 @ about 150 per hr.

The shop people were responsive and informed when I had a few questions. One issue was from the manufacturer, some of my kiln furniture was damaged during shipment, and a few pieces were missing, they sent 2 pieces out right away, it's just that the other 2 chipped legs (from set of 3) weren't replaced. All-in-all, the kiln furniture was my issue, and one day I will hopefully get a solid state relay. 4 firings already, & the outside of the kiln is a pass also, where I was worried about it, being in the laundry room, the walls and shelves are aren't warm. I really like the kiln, it just wish it went into the garage, due to the relay click sound. The builders don't seem to think about ceramic artists. they only built it for a washing machine, and luckily I could use the washing machine's dedicated on a 20 amp circuit. As electricians here are as costly as plumbers.
The review, well This is my first kiln and I even made it a downdraft as well with a tiny hole in the top and one in the bottom, with a tube vent out the bottom, connected to a fan that exit out in place of the dryer. No odors, and the tube fan itself is amazing, remote control, and only 18 watts @ 240rpm. The vent wasn't required, for this size of kiln, I just wanted to give my clay objects the best and avoid vapors. I'm starting out with making some kind of worry stones or jewelry.

l
lindsey biggs (Boerne, US)
i love my jenny

i've found working with clay incredibly rewarding over this last year. as a mom of two special needs kids, and working a high stress level job, i love to the feel of touching cold clay. with little time i couldn't find a good solution to meet with a friend who would fire for me so i used some money just for me to buy my own kiln. i spent months learning (and still am) on how to form what i want with the clay itself, but the firing is now so easy. and there have been no mishaps yet! i liken myself to a stooge so my husband thought for sure i'd find a way to burn the house down but i haven't even come close! i don't buy anything for myself hardly ever but this was a great purchase. i did the electric, and i think the size is perfect for what i do. would recommend this kiln for anyone starting out or who does smaller pieces. i can verify it is as close to idiot proof as you can get. the instructions weren't awesome i'll admit, it took some time to figure them out, so i had a bit of an issue with the initial settings, but i never change them so once i figured that out it was all good.

C
Catherine Rose (Brant Lake, US)
Hobby kiln

I’m really happy with this kiln. It perfect for the small amount I produce in my garage.

M
Melinda Ziegler (Middleton, US)
Jen-Ken AF3C11/9 kiln

What an amazing kiln! I highly recommend this kiln! Easy setup and instructions. Very versatile and worth the money. The quality and customer service is amazing. Thank you for making a wonderful product.

K
Karen karns (Sacramento, US)
Easy Peasy kiln

Very happy with the Jen Ken kiln, easy to operate and does its job!! Thanks for your weekly notifications and follow up, much appreciated. My best to you😁

L
LC (Colorado Springs, US)
Cute little kiln.

Soul ceramics did a wonderful job of communicating throughout the process of waiting for the kiln. Lea was really wonderful when I chatted in or emailed. I wish the kiln would have came with the ceramics instructions instead of the glass fusing ones, but I think I have it figured out now.

K
Kathleen Langford (Girard, US)
Customer Service is Top Notch

I am so pleased with my kiln. There was damage to the controller during shipping, and I was amazed how quickly everything was resolved. I have a new controller, I had assistance from Jen-Ken Kilns with reprogramming the new controller, and my pieces are being fired correctly! I was able to be in contact with "real people" - was never put on hold, and would highly recommend Soul Ceramics and Jen-Ken Kilns! A big thank you to everyone!

E
English Olson (Midvale, US)
Cute little kiln.

Kiln works as expected. Shipped within time frame given. Great communication from soul ceramics! they kept me updated on any change or delivery update.

     * Reviews may be for a similar product in the same series, but a different size.

At Soul Ceramics, we want our customers to know they are getting the best prices online. When you see the blue "Lowest Price Guarantee" words on our website, we are guaranteeing that we have the lowest price anywhere on the internet. In fact, if you find another online store that offers a lower price then us within 30 days of your purchase date please let us know and we will hand you the difference - in cash.  We want you to shop confidently knowing that you are getting the absolute best price on your kiln or wheel.

To request your partial refund, e-mail us a link to the same product on our competitor's website within 30 days from the date of your order and we will process the credit accordingly.

Our Lowest Price Guarantee has some restrictions:

  • You must purchase the item from our website before requesting your partial refund
  • Special promotion offers are not eligible
  • The competitor must be an online store only
  • The website can not be a discounter or auction website, such as eBay
  • The competitor must be an Authorized Retailer for the product
  • The price on the competitor's website must include all shipping and processing fees
  • The manufacturer must be either Evenheat Kiln, Jen-Ken Kilns, or Paragon Industries
Soul Ceramics reserves the right to refuse payment for any products or offers that do not meet the required definition of a fair market price.

    At Soul Ceramics, we know how annoying it can be when you are hit with hidden costs and fees when you purchase items online. That's why we offer FREE SHIPPING* on all standard orders through Soul Ceramics.

    We even cover extra costs such as lift gate service, so the price you see is the price you pay!

    For the full details on this offer and our detailed shipping and returns policies, click here.

    Non standard orders include shipments outside of our standard shipping range, and orders that do not include a kiln or pottery wheel in the same shipment. Soul Ceramics reserves the right to inform you of shipping costs before orders are finalized.

    SOUL CERAMICS LLC EDITOR'S NOTE

    The below warranties were taken from the the respective manufacturers and last updated on June 4, 2018. Please note that these below warranties are all for reference only. While we do our best to keep these up to date; the manufacturer has the final say in what their product is warrantied as. Please reference your owner's manual upon purchase, or contact the manufacturer directly if you would like further clarification.

    Please scroll to the appropriate manufacturer's warranty for your kiln.

    Extended Warranty (Provided by Clyde)

    All Clyde warranties are for the core product only. In the case of any kilns/ovens where additional product options are available (Controllers, furniture kits, stands, blade fixtures, vents, etc.) the warranty does not apply, and the warranty would only be applicable to the kiln/oven.

    Evenheat Kiln, Inc. warranty

    Evenheat Kiln, Inc. guarantees to the original purchaser that for a period of two full years (one year for Evolution Series fiber lids) from the date of purchase the kiln will be free of defects in workmanship and materials when used under normal and proper operating conditions. Evenheat will replace or repair any defective part as specified.


    FOR THE WARRANTY TO BE EFFECTIVE THE PURCHASE MUST:

    1. Provide written proof of date of purchase. (Warranty card sent in at time of purchase.)

    2. Notify the Evenheat Distributor/Dealer from whom the kiln was purchased, within 10 days after defect has been discovered.

    3. Make kiln immediately available for inspection.

    FOR WARRANTY REPAIRS:

    1. Warranty repairs should be handled through the Distributor/Dealer from whom the kiln was purchased, who will arrange for any repairs or replacement of parts under the terms of this warranty upon receipt of the kiln (or defective part). Otherwise the defective part may be returned (postage prepaid) to Evenheat Kiln, Inc. P.O. Box 399 6949 Legion Drive Caseville, MI 48725. If, after factory examination, the original part is found to be defective, a new or repaired part will be shipped prepaid by Evenheat Kiln, Inc.

    2. If the entire kiln is to be returned to the factory, all transportation costs will be borne but he purchaser. The purchaser should notify Evenheat Kiln, Inc. (989) 856-2281 prior to shipping. Evenheat will help advise the best shipping method and if it is necessary to return the entire kiln or only certain parts. Warranty work will be performed within 30 days after defective part is returned to the factory.

    3. Evenheat Kiln, Inc. reserves the right, at its option, to replace the entire kiln or any part of it in order to fulfill its obligation under this warranty.

    THIS WARRANTY DOES NOT COVER:

    1. Freight damage, kilns altered in any way, abuse or neglect, moisture, improper storage or installation.

    2. Kiln overfired (reaching temperature higher than melting point of ware inside kiln) regardless of cause.

    3. Dawson Kiln Sitter or Limit Timer.

    4. Kilns operated on incorrect voltage.

    5. Improper electrical installation.

    6. Kiln furniture or ware.

    7. Kilns used for reduction or salt firing.

    8. Kilns used for purposes other than the firing of glass materials.

    9. Kilns operated in excess of the cone or temperature on the rating plate.

    10. Damage to Property or personal injury that may occur from kilns that are fired on or near wood floors or combustibles.

    11. Damage to property or personal injury that may occur from improper ventilation of the work area and building structure.

    This warranty is in lieu of all other warranties, expressed, or implied.
    Evenheat Kiln, Inc. neither assumes nor authorizes any Distributor/Dealer, Retailer or employee to assume for it any other obligations or liabilities in connection with Evenheat Kilns.

    This warranty is limited as specified above and excludes incidental or consequential damages. Some states or providences do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

    Evenheat Kiln, Inc.
    P.O. Box 399

    6949 Legion Road
    Caseville, MI 48725
    United States of America

    Speedball Art Products warranty

    Your Speedball Art Products Company purchase comes complete with either a 2-YEAR, 5-YEAR, or 10-YEAR WARRANTY (100% parts & labor when labor performed at Speedball Factory) depending on the product purchased - please review the product page. Speedball Art Products Company warrants this Speedball pottery wheel to be free from defects in materials and workmanship under normal use and service, that would affect its operation for a period of 10 (ten) years from the date of purchase.

    This wheel must be registered within 30 (thirty) days of the date of purchase to make the warranty effective. Registration can be performed either online at http://speedballart.com/warranty_form.php or by contacting our Customer Service Department at 800.898.7224. The obligation of this warranty shall be limited to repairing or replacing any part of the wheel which, at the discretion of the Company, shall be proven defective in materials or workmanship under normal use and service during the time period commencing with the date of purchase. Full wheel replacement will be at the discretion of the Company and will only be considered for claims initiated within 30 (thirty) days of purchase.

    This warranty does not apply to:

    1. Damage caused by accident, abuse, mishandling or dropping.

    2. Units which have been subject to unauthorized repair.

    3. Units not used in accordance with direction.

    4. Damage exceeding the cost of the product.

    5. Damage by flood, lightning or natural disaster, war declared or undeclared.


    In no case shall the Company be liable for any incidental or consequential damages for breach of this or any other warranty, express or implied, whatsoever.

    The limit of this warranty includes the product only and not any loss of work time or contract due to inability to use the wheel.

    Parts in need of repair shall be returned by the customer, shipping prepaid, to:


    Speedball Art Products
    Repairs Department
    2301 Speedball Road
    Statesville, NC 28677

    After any repair or replacement, Speedball Art Products Company will return under normal working schedule and by UPS/FedEx Ground Service (for customers in the Continental United States). Rush repair orders are accepted by purchase order and credit card payment or COD charges. Shipping charges for rush returns other than UPS/FedEx Ground Service must be prepaid via credit card or COD. No U.S. Postal returns. Be sure to wrap the product or parts securely when shipping to avoid shipping damage.

    Policy Statement for Speedball Potter’s Wheel Warranties:

    1. Warranty card must be on file at Speedball Art Products Company

    2. Customer must contact Speedball Art Products Company for Return Authorization Number prior to returning the wheel. Please write the number clearly on the outside of the box.

    3. Parts for warranty repair must be shipped prepaid to Speedball Art Products Company.

    4. Send entire system as a unit control box, motor, foot pedal and all power with no cut cords. Experience has shown that by sending the entire system, repairs are made the first time, made correctly and with less time and trouble for all parties concerned. Full wheel shipments for repair or replacement must be shipped in original packaging.

    5. Enclose a brief description of the problem, along with your name, UPS address, phone number, email address and personal address.

    6. Speedball Art Products Company will pay UPS/FedEx Ground Service shipping back to customer.

    7. Any extra charges due to a request by the customer to rush shipment are to be paid by the customer.

    8. For your convenience, troubleshooting can also be conducted by phone with one of our trained Customer Service Representatives at 800.898.7224, Monday-Friday, 8:00am-5:00pm EST.

    Jen-Ken Kiln Warranty

    JEN-KEN KILNS are warranted to the original purchaser to be free from defects in materials and workmanship when used under normal and proper conditions for the periods specified below. The warranty period begins at the date of original purchase from JEN-KEN KILNS, a JEN-KEN KILN authorized distributor or dealer.

    JEN-KEN KILNS are warranted for 2 years (1 year for the Chili Pepper) from date of original purchase.

    Dawson Kiln Sitter is warranted by a separate 1 year warranty from WP Dawson, Inc.


    PerfectFire panels are warranted by a separate 1 year plan from the manufacturer.


    FireRight panels are warranted by a separate 1 year plan from the manufacturer.


    To Claim under the Warranty, the purchaser must:

    1. Provide written proof of the date of purchase.

    2. Notify JEN-KEN KILN (or distributor/dealer) from whom the kiln was purchased.

    3. Make the kiln immediately available for inspection.

    FOR WARRANTY REPAIRS:

    1. Warranty repairs should be handled from where you purchased the kiln and they will arrange for any repairs or replacement of parts under the terms of the warranty and upon receipt of the kiln or defective part(s). Warranty work, other than that performed at the factory, DOES NOT include labor, just parts. The defective parts may be returned to JEN-KEN KILNS (postage prepaid) 3615 Ventura Drive West, Lakeland, Florida USA 33811. Include your name and address, a letter of explanation and the name and address from where you purchased the kiln. If, after factory examination the part is found to be defective, a new or repaired part will be sent prepaid by JEN-KEN KILNS.

    2. If the entire kiln is to be returned to the factory, all transportation costs are the responsibility of the purchaser. The purchaser should notify JEN-KEN KILNS (863) 648-0585 prior to shipping. We will advise the best shipping method and if it is necessary to return the whole kiln or only certain parts. Factory warranty work will be performed within 30 days after the defective part is returned to the factory.

    3. JEN-KEN KILN reserves the right, as its option, to replace the entire kiln or any part of it in order to fulfill its obligation under this warranty.

    This Warranty DOES NOT Cover:

    1. Freight damage.

    2. Kilns altered in any way after leaving our factory.

    3. Abuse or neglect, moisture, improper storage.

    4. Improper installation.

    5. Kiln Overfires (exceeding the melting temperatures of the materials being fired) regardless of the cause of the overfire. (This does not occur in kiln that are monitored while firing. If in doubt during a firing, turn the kiln off)

    6. Dawson Kiln Sitter or Limit Timer.

    7. Kilns operated on incorrect voltage.

    8. Improper electrical installation.

    9. Kiln furniture.

    10. Kiln ware.

    11. Kilns used for purposes other than firing ceramic or glass materials.

    12. Kilns operated in excess of the temperature rating of the kiln.

    13. Damage that may occur from kilns that are fired on or near combustible materials (i.e.: wood floors).

    This Warranty is in lieu of all other warranties, expressed or implied. JEN-KEN KILN neither assumes nor authorizes any distributor, dealer, retailer or employee to assume for it any other obligation of liabilities in connection with JENKEN KILNS.

    This warranty is limited, as specified above and excludes incidental or consequential damages, so the above limitations or exclusions may not apply to you.

    This warranty give you specific rights and you may also have other rights why vary from state to state.


    JEN-KEN KILNS
    Manufactured by Sir Ramic Porcelain, Inc.
    3615 Ventura Drive West Lakeland, Florida USA 33811
    (863) 648-0585

     

    Olympic Kilns Warranty

    Warranty Registration

    This Warranty Is Applicable to All Kilns Manufactured by Olympic Kilns That Are Used for Ceramics, Pottery and Glass.

    Cone 10 Kilns Have a One-Year Warranty and All Other Kilns Have a Two-Year Warranty. Certain Parts, Thermocouple, Kiln Sitter Tube Assembly, Are Not Covered Under Warranty, Nor Is Kiln Furniture.

    Haugen Manufacturing, Incorporated guarantees to the original purchaser that any defects in OLYMPIC KILNS which become apparent within two years (one year for the Dawson Kiln Sitter and safety timer which is covered by warranty from W. P. Dawson, Inc. and kilns rated at cone 10) will be remedied as specified below.

    Our warranty, of course, does not cover any kiln damaged or altered by you or others after it leaves our factory. Our warranty does not cover damage due to reduction or salt firing, over-firing, exceeding the maximum cone or temperature ratings, improper installation, use of electrical voltages different than those specified, or firing material other than ceramics.

    If a defect of manufacturer becomes apparent, and your retailer does not resolve it to your satisfaction, we will in the following manner: Within (6;) days of the first indication of a defect, tell us in writing of defect, and the date, place and proof of the your purchase. We will contact you to determine what parts seem to warrant repair and to instruct you as to shipment of the kiln parts. You will dismantle, package, and ship the parts we request (and no others), to us at your cost, freight prepaid. If the kiln has a defect of manufacture we will repair, replace or refund as is appropriate, within (30) days. We will ship to you at our cost in your package, for you to reinstall at your cost. If the parts shipped by you to us are in need of
    repair or replacement for something which is not covered by this warranty, we will not perform the work until you have authorized the work and made arrangements for payment. If substantially an entire kiln is returned for repair under warranty, you will prepay the cost of packaging and shipping both to and from
    the factory.

    We shall in no event be liable for injuries to persons or property or for incidental, contingent, special or consequential damages arising from the use of our products. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

    OLYMPIC KILNS
    HAUGEN MANUFACTURING, INC.
    P. O. BOX 1347
    4225 THURMON TANNER ROAD FLOWERY BRANCH, GA 30542
    (770) 967-4009

    Paragon Kilns

    Warranty Registration

    Paragon kilns are warranted to the original purchaser by Paragon Industries, L.P. (herein Paragon), subject to the listed exclusions below, to be free of defects in workmanship for the periods specified below. The warranty period begins from date of shipment from the Paragon factory unless date of original purchase from an authorized Paragon distributor or dealer can be established.

    Warranty Periods

    QuickFire kilns: 3 months

    BlueBirds, HT-series, Home Artist, FiberFuse-16, J-series, KM-Series, SC-series, and Vulcans: 1 year

    (Vulcan elements are not warranted.)

    Kilns with a maximum temperature rating above 2300ºF (except Dragons, Iguana and Vikings): 1 year

    TnF 2 controllers, GF, GL, and Fusion series kilns rated 2000°F or lower and all other kilns not listed in this section with a maximum temperature rated 2300ºF or lower: 2 years

    Controllers: Sentry (12 key): 2 ½ years; Sentry Xpress (3 key): the length of the new kiln’s warranty or 1 year on replacement controllers for older kilns.

    Dragon, Super Dragon, Iguana and Viking kilns: 2 years. S-Type thermocouple and APM elements fall within the 2 year warranty. Standard elements on these models: 6 months. Sentry controller on these models: 2 ½ years. Type-K thermocouple is not warranted on the Dragon, Iguana and Viking.

    These warranty periods apply unless otherwise agreed to in writing.

    This warranty excludes: 1) Kilns or furnaces damaged by overfiring (exceeding the melting temperature of the material being fired) regardless of cause of overfiring; 2) Ware, tools, kiln furniture, or anything inside damaged by overfire; 3) Kilns allowed to exceed the maximum temperature shown on kiln’s nameplate, regardless of cause; 4) Kilns subjected to abuse, neglect, freight damage or improper storage; 5) Kilns used for either reduction or salt firing, 6) Kilns damaged by improper electrical installation; 7) Kilns used for purposes other than firing ceramics, glass, heat treating, or the purpose for which it was intended; 8) Element burnout caused by contact with foreign materials; 9) The patented Dawson Kiln Sitter and/or Limit Timer manufactured by W.P. Dawson, Inc., 399 Thor Place, Brea, California 92621.

    WARRANTY COVERAGE EXTENDS ONLY TO THE ORIGINAL PURCHASER AND DOES NOT COVER REPLACEMENT OF PARTS THAT ARE, BY THEIR NATURE, EXPENDABLE. THIS WARRANTY IS VOIDED IF THE PRODUCT IS ADVERSELY AFFECTED BY ATTACHING ANY FEATURE OR DEVICE TO IT, OR IS IN ANY WAY TAMPERED WITH OR MODIFIED WITHOUT EXPRESS WRITTEN PERMISSION FROM PARAGON INDUSTRIES, L.P.

    Paragon Industries, L.P., will repair or replace any parts that become defective under normal and proper use during the specified period for the kiln purchased, providing the kiln has not been subjected to misuse or the listed exclusions. Paragon will furnish and install replacement parts at the factory with transportation costs to and from the factory paid by the owner; or upon receipt of defective parts at the factory, and after factory examination of the defect, Paragon will furnish replacement parts, complete with installation instructions, shipped postpaid to owner. The warranty on the repaired and/or replaced parts will be limited to the unexpired term of the original warranty.

    Any claim for adjustment under this warranty must include name and address of dealer from whom kiln was originally purchased. Repair or replacement of any defective parts shall fulfill all obligations of Paragon. No other obligations or liabilities are assumed in connection with Paragon kilns nor does Paragon Industries, L.P. authorize its distributors or dealers to assume any other obligations or liabilities on its behalf.

    THERE ARE NO OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL PARAGON INDUSTRIES, L.P. BE LIABLE FOR ANY LOSS OF PROFITS OR ANY INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF ANY SUCH DEFECT IN MATERIAL OR WORKMANSHIP. NOTE: SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

    This agreement is made in the State of Texas and its validity, construction, and all rights under it will be governed by the laws of the State of Texas. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

    Paragon Industries, L.P.,
    2011 South Town East Blvd.
    Mesquite, Texas 75149-1122
    1-800-876-4328
    Fax: 972-222-0646

    Customer Reviews

    Based on 18 reviews
    94%
    (17)
    6%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    J
    Jessica Brooks (Oxford, US)
    Perfect, simple, professional

    I LOVE my new kiln!! I am new to pottery and ceramics and this is my first kiln. Great price, great customer service, easy to order and exactly as described! perfect fit for my home as it is small and fits a standard home electrical outlet without having to make any electrical modifications. SO easy to use with easy-to-read manual— my very first projects fired perfectly and I have never fired a kiln in my life before now. Perfect 04-06 range bisque and glaze just as described, which is exactly what I wanted. I couldn’t be happier with or more proud to own this equipment and everything that came with. Zero issues whatsoever with ordering and delivery, and I really appreciate that it arrived a week early with frequent communication and updates from the time I ordered, to the time it arrived, and great follow-up even after a couple of weeks of use. I never had to contact Soul Ceramics once regarding my order because I was provided all the information and updates I needed and more as my order was being fulfilled… but I have no doubt that any concerns, issues or questions I might have had would have been addressed and resolved promptly and professionally. seriously impressive, and this is a dream come true for me as a maker. I really can’t say enough about how satisfied and excited I am with this company and equipment. Thank you so much for a wonderful product and outstanding customer service!

    B
    Ben Malone (Mobile, US)
    Jen Ken 5 Stars

    Soul Ceramics customer service is second to none. They do a great job of keeping you updated throughout the entire process and let you know exactly what to expect at every step. This was truly a great buying experience.

    It would be nice to have some more pictures on the website that give a better idea of the size of this kiln. It turned out to be exactly what we needed but felt like we couldn’t find any pictures to give the size justice anywhere.

    T
    Terissa Milton (El Paso, US)
    Jen Ken

    Great shop, for my odd request of a 15 plug instead of a 20 plug, this jen ken was the only kiln I could find, this large at 15. It 's still small, not for large vases, but not a bad size for smaller objects. It's heating well, and keeps the heat ramping down; after 800 @ about 150 per hr.

    The shop people were responsive and informed when I had a few questions. One issue was from the manufacturer, some of my kiln furniture was damaged during shipment, and a few pieces were missing, they sent 2 pieces out right away, it's just that the other 2 chipped legs (from set of 3) weren't replaced. All-in-all, the kiln furniture was my issue, and one day I will hopefully get a solid state relay. 4 firings already, & the outside of the kiln is a pass also, where I was worried about it, being in the laundry room, the walls and shelves are aren't warm. I really like the kiln, it just wish it went into the garage, due to the relay click sound. The builders don't seem to think about ceramic artists. they only built it for a washing machine, and luckily I could use the washing machine's dedicated on a 20 amp circuit. As electricians here are as costly as plumbers.
    The review, well This is my first kiln and I even made it a downdraft as well with a tiny hole in the top and one in the bottom, with a tube vent out the bottom, connected to a fan that exit out in place of the dryer. No odors, and the tube fan itself is amazing, remote control, and only 18 watts @ 240rpm. The vent wasn't required, for this size of kiln, I just wanted to give my clay objects the best and avoid vapors. I'm starting out with making some kind of worry stones or jewelry.

    l
    lindsey biggs (Boerne, US)
    i love my jenny

    i've found working with clay incredibly rewarding over this last year. as a mom of two special needs kids, and working a high stress level job, i love to the feel of touching cold clay. with little time i couldn't find a good solution to meet with a friend who would fire for me so i used some money just for me to buy my own kiln. i spent months learning (and still am) on how to form what i want with the clay itself, but the firing is now so easy. and there have been no mishaps yet! i liken myself to a stooge so my husband thought for sure i'd find a way to burn the house down but i haven't even come close! i don't buy anything for myself hardly ever but this was a great purchase. i did the electric, and i think the size is perfect for what i do. would recommend this kiln for anyone starting out or who does smaller pieces. i can verify it is as close to idiot proof as you can get. the instructions weren't awesome i'll admit, it took some time to figure them out, so i had a bit of an issue with the initial settings, but i never change them so once i figured that out it was all good.

    C
    Catherine Rose (Brant Lake, US)
    Hobby kiln

    I’m really happy with this kiln. It perfect for the small amount I produce in my garage.

    M
    Melinda Ziegler (Middleton, US)
    Jen-Ken AF3C11/9 kiln

    What an amazing kiln! I highly recommend this kiln! Easy setup and instructions. Very versatile and worth the money. The quality and customer service is amazing. Thank you for making a wonderful product.

    K
    Karen karns (Sacramento, US)
    Easy Peasy kiln

    Very happy with the Jen Ken kiln, easy to operate and does its job!! Thanks for your weekly notifications and follow up, much appreciated. My best to you😁

    L
    LC (Colorado Springs, US)
    Cute little kiln.

    Soul ceramics did a wonderful job of communicating throughout the process of waiting for the kiln. Lea was really wonderful when I chatted in or emailed. I wish the kiln would have came with the ceramics instructions instead of the glass fusing ones, but I think I have it figured out now.

    K
    Kathleen Langford (Girard, US)
    Customer Service is Top Notch

    I am so pleased with my kiln. There was damage to the controller during shipping, and I was amazed how quickly everything was resolved. I have a new controller, I had assistance from Jen-Ken Kilns with reprogramming the new controller, and my pieces are being fired correctly! I was able to be in contact with "real people" - was never put on hold, and would highly recommend Soul Ceramics and Jen-Ken Kilns! A big thank you to everyone!

    E
    English Olson (Midvale, US)
    Cute little kiln.

    Kiln works as expected. Shipped within time frame given. Great communication from soul ceramics! they kept me updated on any change or delivery update.